2
EN 2.10 Shuttle Manual 1712
SW 838023
Ultrasonic Level Transmitter and Sensor
CE Certificate of Conformity
This product complies with the requirements concerning electromagnetic compatibility (EMC)
stipulated in Council directive no. 89/336/EEC of 3rd May 1989, altered at directive no.
92/31/EEC, on the approximation of the laws of the Member States relating to electromag-
netic compatibility.
CE approvals
We declare that the Shuttle
®
transmitter and ultrasonic sensors comply with the values stipu-
lated in EN 50081-1 and EN 50082-1.
Ex approval of ultrasonic sensors
Shuttle
®
ultrasonic sensors are approved for mounting in explosive amospheres.
Types 200630/31/40/41: FM Class 1, Div. 1, Group A-G
IMPORTANT
The first time power is applied to the mounted
Shuttle
®
level transmitter and ultrasonic
sensor, the level transmitter must be configured for the connected sensor type.
The procedure is located on page
14
, "Applying power".
If, at a later time, another or a newer sensor type is connected to the transmitter,
the level transmitter must be re-configured accordingly.
The procedure is located on page
69
, "Appendix F New sensor / changing sensor".
June 2007
Liability
MJK Automation A/S are liable to the common rules of Danish law on prod-
uct liability, however, the liability is reduced to coverage of our public liability
insurance of products. To the extent where nothing else follows in lines of
invariable rules of law, we are not liable for loss of profits and working deficits
or other indirect losses.
Changes
As our products are developed continuously, we reserve the right to make
any alterations without prior notice.
MJK Automation A/S is a Xylem Brand.