Xylem FLYGT Pareo DCM 711, Инструкция по установке, эксплуатации и обслуживанию

Страница: 46 / 56

Back up/restore
Part Description
Controller data plate
• Restore from USB
The option to restore the controller ratings from an
external USB drive
Pump data plate
• Restore from USB
The option to restore the configuration of the pump
data plate from an external USB drive
Configuration
Part Description
Controller data plate The option to configure the controller manually
Pump data plate The option to configure the pump manually
8.5 Setup Wizard
Part Default value Values Description
Language English For more
information, see
Language on page
38
The available languages
Pump sensor setup
The option only
appears if the
controller is not
able to detect the
pump module.
None • Pump I/O
• FLS and thermal
switch
• Thermal switch
• None
Pareo mode
• Pump I/O
The option to set
up the controller
so it is used with
a pump module
Standard mode
The selection of the
pump sensors that
connect to the
controller
• FLS and thermal
switch
• Thermal switch
• None
No pump
sensors connect
to the controller.
Nominal voltage 0 V 0–9999 V The nominal voltage of the pump
The option only appears if the controller
is not able to detect the pump module.
Nominal current 0 A 0–9999 A The nominal current of the pump
The option only appears if the controller
is not able to detect the pump module.
System units Metric • Metric
• Imperial
The settings for the units of
measurement
Select the date Local time in the
country of the
manufacturer
00:00:00–23:59:00 The settings for the date
Select the time Date, today 2000-01-01 –
2099-12-31
The settings for the time
Pump name – Four or more
characters
The name of the pump
Site name – Four or more
characters
The name of the site
Pump control mode AUTO • AUTO
• HAND
• Off
The pump control mode
8 User Interface
42 DCM 711 Installation, Operation, and Maintenance Manual