Xylem FLYGT CCD 301, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 20

WS010148A
-
DI
+
24V
-
+
+24V
GND
CCD 301
– Connect the 4-20 mA analog input device to the terminals.
WS010034A
DI
+ -
AI
+ -
For more information about the terminals, see Terminals on page 15.
4. Connect the power leads to the power input terminals.
WS009630A
24 VDC
+ -
5. Turn on the power of the equipment and if necessary, the separate power
supply.
6. Configure the connected devices.
For more information, go to the support site at xylem.com/avensor.
7. Turn on the unit.
3.3 Check the mobile connection
The unit is turned on.
1. Check the network signal strength.
3 Installation
CCD 301 Installation, Operation, and Maintenance Manual 11