PAGE 19
Aquavar IPC Start-Up Genie
CentriPro
CHAPTER 10: COPY TO LCP (LOCAL CONTROL PANEL)
Allows all of the controlled parameters to be copied to the LCP. This is helpful for saving the drive state, reverting
the drive to a previous state, or quickly configuring another controller with the same settings.
• Copy Setup to LCP for the transfer to other drive: To easily copy setup to
another drive, select “Yes” to copy setup to LCP then transfer LCP to another
drive and select “Copy from LCP” in the Start-Up Genie.
CHAPTER 11: COPY FROM LCP (LOCAL CONTROL PANEL)
Allows all of the controlled parameters to be copied from the LCP. This is helpful for saving the drive state,
reverting the drive to a previous state, or quickly configuring another controller with the same settings.
• Copy Setup from LCP: Select “All” to copy all parameters in all set-ups from the
LCP to the drive. Select “Application Only” to copy all parameters in all set-ups
except for size dependent parameters.
