Xylem Aanderaa Motus 5729, Руководство по эксплуатации

Страница: 67 / 123

August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729 Page 67
4.7
System Configuration
System Configurations holds four different sections
that are mainly controlling the output from the sensor.
The sections are:
•
Common Settings
•
Terminal Protocol
•
Processing Dependencies
•
Output Setting
Common Settings are used to set the mode and to
save power by allowing the sensor to go to sleep
between meassurements.
Processing Dependencies are settings used in the
wave calculation.
Please note that the time settings here are controlling
the sensor wave calculation time and the time series
length, not the Output Interval . Interval(s) are
controlling the Output Interval , how often the data is
presented on the output line.
Interval(s) is configured in Device
Configuration>Deployment Settings see chapter
4.4.1 or in the Recorder Panel see chapter 4.2.1.
Output/Storage Settings are controlling the output
from the sensor. Except from Significant Wave
Height H
m0
, Wave Peak Direction and Wave Peak
Period that always will be presented all other
parameters can either be set to Off or Output .
For configuration details, refer to chapter 4.5.1
through 4.5.4.
Figure 4-19: System Configuration