Xylem Aanderaa Motus 5729, Руководство по эксплуатации

Страница: 37 / 123

August 2020 – TD 316 OPERATING MANUAL – Motus Wave Sensor 5729 Page 37
AADI Real-Time Collector
uses a default setting that fits
for most Smart Sensors.
However the SmartGuard with
Motus Wave Sensor outputs a
large amount of data and
might have much longer
response time (depending on
the configuration) than other
smart sensors. Some of the
connection settings might
need to be changed. We
recommend using the settings
as shown in Figure 3-4.
After updating the Advanced
Connection Settings , click
on Apply and OK and then
OK to go back to the start
screen.
Figure 3-4: Advanced connection setting
The Advanced Settings are only accessible to change when the port is closed. If the settings are grey then you first
need to close the port.
The new connection is now
shown in the AADI Real-Time
Collector connection list.
Choose the new connection and
click on the Open Port button.
The connection list might
contain different connection to
other sensors as well. Then
highlight the SmartGuard
connection to proceed.
NOTE: This procedure only
needs to be done once. This
connection will be in the
connection list at next start-up.
Figure 3-5: Connection list