Xycom 9457, Руководство пользователя

Страница: 49 / 80

Chapter 4 – System Operation
4-5
Reset
This option restores the factory default settings. You will be prompted to confirm that
you wish to reset. Press the button corresponding to “Y” to confirm, or the button corre-
sponding to “Esc” (the Degauss button) to cancel the reset operation.
Note
Selecting the Reset option erases all custom settings you have saved in the monitor.
Special
This option provides access to several voltage level settings. In normal operation, you
should not need to adjust these settings.
Caution
Do not adjust the settings on the Special menu, except under the instruction of a Xy-
com application engineer. Indiscriminately changing the values on this menu may re-
sult in damage to the monitor module or equipment connected to it.
Power Management Modes
The 9457 monitor module conserves energy by operating in the three modes listed be-
low. It automatically switches between these modes based upon the presence of vertical
or horizontal sync signals.
Normal Mode
This is the normal operating mode the monitor enters at start-up. The monitor remains in
Normal mode so long as both vertical and horizontal sync signals are present.
Standby Mode
The screen is blanked immediately when the horizontal or vertical sync signal is removed
from the monitor for more than five seconds. From standby mode, the monitor will in-
stantaneously return to Normal mode upon restoration of the horizontal and vertical sync
signals.