Xycom 9457, Руководство пользователя

Страница: 12 / 80

Chapter 1 – Introduction
1-5
Fan Intake Filters
These replaceable filters separate particulate contaminants
from the cooling air drawn into the 9457.
Front Drive Bay
This bay may hold a single 3.5" externally-accessible mass
storage device, such as a floppy drive or tape back-up unit.
To install a device in this bay, you must install the 9457-FFK
Front Floppy Kit.
Rear
Figure Chapter 1 -2 illustrates the features on the rear of the 9457 computer module.
100-120V ~ 3A MAX.
200-240V ~ 3A MAX.
H
O
S
T
/
L
E
D
KEYBOARD
C
O
M
2
C
O
M
1
o
I
5.25" Bay
(optional CD-ROM)
3.5"
Floppy
Drive
ON/OFF
Switch
Serial
Ports
Cooling
Grille
Keyboard
Port
Host/LED
Connector
Power
Receptacle
Monitor Auxiliary
Outlet
Figure Chapter 1 -2. 9457 Computer Module Rear Components
ON/OFF Switch This switch should be positioned to OFF (O) until the system
is properly configured and connected to a 115 VAC or
230 VAC power source.
Cooling Grille
Unobstructed airflow is essential to proper ventilation and
cooling of the 9457. Do not obstruct this outlet.
Power Receptacle
The plug and cord must be securely positioned before turning
power ON.
Monitor Auxiliary
Outlet
This switched outlet may only be used to power the 9457
monitor module or a monitor or other device that draws less
than 3.0 A peak current.