Xycom 9457, Руководство пользователя

Страница: 17 / 80

9457 Industrial Computer
1-10
Video Controls The video controls consist of two knobs and five buttons.
These are, from left to right:
Contrast knob – Turning this knob adjusts the contrast on
the display.
Brightness knob – Turning this knob adjusts the brightness
of images on the display.
Degauss button – Used to manually degauss the monitor.
Use of this control is described in Chapter 4.
Soak Test button – This button is not used during normal
operation.
On-Screen Display mode button – This button is used to
select On-Screen Display mode to adjust the vertical size,
horizontal position and vertical position of the image on the
display. This mode is described in the
On-Screen Display
Mode Options section in Chapter 4.
Note
The pinouts for connectors and ports are shown in Appendix B.
Quick Start-Up
Note
This section gets your 9457 up and running without explaining the capabilities and
options of the system. The appendices provide technical specifications, diagrams, and
other information required for system operation.
Chapter 3 contains important safety information describing requirements for the safe
operation of this product. Xycom strongly recommends that you read Chapter 3 be-
fore mounting the 9457 in a panel, or otherwise placing it into regular service.
To prepare the system for use, perform the following steps.
Warning
Turn off the power to the unit and unplug the power cord before making any adjust-
ments to the inside or outside of the computer.
1. Install any additional cards you wish to use in the computer module, then reassemble
the unit.