16
143241 (B)
Chapter 3 – Monitor Settings
Caution
Leaving your TFT LCD display on constantly can result in temporary image
retention (TIR). TIR can be avoided by using a screen saver, enabling the idle/doze
timeout feature, or by turning off the display when it is not in use.
On Screen Display (OSD) Switch
The OSD Select switch is located on the I/O panel (see Figure 2-3) and offers two
choices: enable or disable. The keys on the front of the monitor can be locked-out by
setting the OSD switch to disable, or unlocked by setting the OSD switch to enable.
Caution
Please use OSD after confirming the position of the
OSD Select Switch
.
Touch data is transmitted to host while OSD menu is displayed.
Mode and Image Adjustment
Not all video controllers produce exactly the same video output levels or the same
timing. The 5017T uses onscreen configuration menus to make setup and adjustment
easy. The menus are selected and the menu items are adjusted using the buttons
located on the front panel of the monitor. With the OSD enabled, follow the general
instructions below to navigate through the adjustment menus and make adjustments.
Figure 3-1. Front Panel Control Buttons
Press MENU to view the onscreen adjustment menus. Use LEFT or RIGHT to
highlight one of the following adjustment menus:
Image quality adjustment menu
Image position adjustment menu
