Contents for the LED screen
Display character
Meaning
Display character
Meaning
The chlorine generator is
open
Current salinity level (ppm)
The chlorine generator is
closed
Current water temperature
detected, the default is ℃,
Automatic cleaning mode
setting, the number
represents the self-cleaning
interval hour
Error alarm and the
corresponding error light is
in red
The chlorine generator is in suspension
The chlorine generator alternates between chlorination producing and suspension, and takes
one hour as a cycle. For example, when it is 60%, there are 36 minutes in chlorination
producing status, and the rest 24 minutes are in suspension.
DAILY USAGE AND MAINTENANCE
Salinity regulation
The salt in the pool is constantly recycled and the loss of salt is smaller than during the entire
swimming season. This loss is mainly due to splashing, backwashing, or drainage (due to
rain). Salt will not be lost in evaporation. Ideal salt levels range from 2.7 g/L (2700 PPM) to
3.4 g/L (3400 PPM)
High salt will probably give you a salty taste of pool (normally, at a level of 3.5g/ (3500 PPM)
-4 g/L (4000 PPM) you will taste salty) when the salinity of chlorine generator is higher than
4800PPM, the chlorine generator will stop (see ERR4 fault), please replace part of the pool
water. Low salt level will reduce the chlorine producing efficiency. When the salinity is lower
than 1.7g/L (1700 PPM), t he chlorine generator will stop (refer to ERR2 fault). At this time,
add salt according to the recommended volume given in the table below.
6
