SPECIFICATIONS / TROUBLESHOOTING
ASSEMBLY
INSTALLATION
4
MAKING THE CUSTOM CUT:
This is for the segment of fence that will be shorter than the others. Usually
this will be at the back for the pool. This last piece will most likely have fewer holes in it.
TENSION ANGLES FOR DRILLING:
To keep the fence upright and able to withstand inclement weather
you’ll need to drill some of the holes at an angle. For example, if the part of the pool is wider, youwill
want to drill at a light lean away from the pool, and if the pool shape goes inward, you should drill at
a heavy lean toward the pool. If the edge of the pool is straight, drill at a level angle. This is to ensure
proper tension around the pool. See diagrams below.
Make sure when measuring the
custom cut that the moldings face
away from the pool. Also make
sure you are measuting from the
center line outwards.
