XtremeAIR PX01-W30, Руководство по установке и инструкция пользователя

Страница: 5 / 14

www.XtremeAirUsa.com PAGE
5
ELECTRICAL REQUIREMENTS:
I
MPORTANT
: Observe all governing building codes and city ordinances.
■ A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.
It is the customer’s responsibility:
•
To contact a qualified electrical installer.
•
To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/
NFPA 70 — latest edition*, or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22. 2 No. 0-
M91 - latest edition** and all local codes and ordinances.
TOOL YOU WILL NEED:
ƒ Maker or pencil
ƒ Stud finder
ƒ Measuring tape
ƒ Powered screwdriver or drill
ƒ Flat & Phillips screwdrivers
ƒ Box level
ƒ Drill with 1/8” drill bit
ƒ Jigsaw or keyhole saw
ƒ Cabinet Jack (optional)
PARTS SUPPLIED:
(6) Anchors
(2) or (3) Baffle Filters
(1) Instruction manual book
(1) Remote control
(PX02 model only)
(1) Outside Chimney
(1)Inside Chimney
Ceiling Bracket (1)
(6) Chimney Screws
(6) Mounting Screws
Aluminum Pipe
(check w/ your
local code for
approval)
(1) Oil tunnel
(except for PX04)
06
05
07