www.XtremeAirUsa.com
PAGE
11
D.
Activating Smoke Detector Function:
D. Changing the clock:
While the machine is off:
1.
Touch power sign once; the hour indicator will flashing
2.
use (+) or (-) to adjust to designed hour
3.
Touch power sign again; the “minutes” indicator will flashing
4.
use (+) or (-) to adjust to designed minutes
5.
Touch power sign again to clear the screen
Note: The clock display is only available for product manufactured after October 2012.
E. Remote Control Sensor:
2. TYPE 2: TOUCH BUTTON CONTROL (FOR PX01, PX03, PX04 models ONLY)
NOTE: For best results, start the range hood before cooking and allow it to operate several minutes after the cooking
is completed to clear all smoke and odors from the kitchen.
Button functions
:
1.
(1) To power ON/OFF, and to activate power-off delay timer.
2.
(2) To decrease blower (motor) speed, decrease timer value, and enter timer mode.
3.
(7) To increase blower (motor) speed, increase timer value, and cumulative timer reset.
4.
(3) Blower (motor) is running light indicator
5.
(4) Shows current blower (motor) speed (1-4).
6.
(5) Lights up when lights turned on.
7.
(6) To turns ON/OFF lights.
8.
(8) Indicates the accumulated time the system is running.
9.
(9) Indicates the length of time left for delay off function.
10.
(10) Lights up when auto-shutdown delay timer function is on.
A. Activating Blower Function:
* Option 1: Touch and hold down (+)for 1-2 seconds
* Option 2: Touch and hold down power sign (1) for 1-2 seconds
(the blower will be running as the same speed as last used)
Note: The system saves user configurations, settings such as timer and blower (motor) speed will
remain the same the next time it is turned on.
• While the machine is off, touch
Auto Function
button to activate the smoke detector auto function mode
NOTE: this function will only worked when there’s a lot of smoke. Once this button is touched, all
other buttons are not active.
Remote control sensor receives infrared (IR) signal from the remote control. The maximum
distance for IR data transmission is 3 meter and requires direct line of sight. The transmission
distance may vary depending on temperature and remote control battery condition.
Light settings are independent from other settings (including power-off delay) and lights have to
be manually turned on or off.
The system saves user configurations, settings such as light, timer and blower (motor) speed
will remain the same the next time it is turned on.
