Xtreme XR1255, Руководство по эксплуатации

Страница: 69 / 80

For information call (800) 497-1704
Page 67
XR1255 Operation
has sustained permanent deformation or is otherwise
damaged shall be replaced
20)
Use of railings, planks, ladders, etc on the platform
for purpose of achieving additional reach or height is
prohibited
21) Before elevating personnel, the area around and
under the work platform should be marked to warn
anyone on the ground that overhead work is being done
22) The platform shall be lowered to ground level for
personnel to enter and exit Personnel shall not climb on
any part of the rough terrain forklift in attempting to enter
and exit
23)
Protection must be provided for the personnel on the
work platform from pinch points or moving parts while in
their normal working position on the platform
24)
Provide overhead protection device as required by
work site conditions or if requested by the user of the
platform
Frame Leveling

Warning
Use of the frame sway control with the
boom raised above horizontal could cause
tip over, which could result in death or
serious injury. Always use the frame sway
control to level the forklift BEFORE raising the boom
above horizontal. If the forklift cannot be leveled
using the frame sway control, do not attempt to raise
or place load. Reposition forklift or have surface
leveled.
The frame sway control handle has variable motions from
the center that control frame sway (right and left)
Table 12. Frame Sway Functions
Function Control Handle Action
FRAME SWAY RIGHT Move control handle RIGHT
FRAME SWAY LEFT Move control handle LEFT
Figure 7-34. Frame Sway Control Handle.
The frame sway control handle controls the frame sway
(right and left) functions
To lock the frame sway, place the travel select lever in
NEUTRAL or apply the service or parking brake
NOTE: Maximum frame sway is 22° overall or 11° each
direction, left and right
A frame level indicator is mounted on the inside upper
right corner of the operator’s cab The frame level
indicator allows the operator to view if the forklift has
been positioned in a level condition Always frame sway
the forklift right or left until the indicator shows 0° (level)
Figure 7-35. Frame Level Indicator.

Warning
The reach forklift includes a Frame Sway
Override switch. Improper use of the
Frame Sway Override switch could cause
death, serious injury, or property damage.
The frame sway feature becomes locked and will not
operate when the boom is raised 40° or more Applying
service brake, parking brake, and placing travel select
lever in NEUTRAL, then pressing the Frame Sway Override
switch (the trigger on the Front Control handle) will
override the lockout feature and allow frame sway
Figure 7-36. Frame Sway Override Switch.