Xtreme XR1255, Руководство по эксплуатации

Страница: 43 / 80

For information call (800) 497-1704
Page 41
XR1255 Operator Cab
If the coolant gauge shows abnormal readings, stop the
forklift, follow proper shut down procedures, tag the
forklift with “Do Not Operate” tags, and have a qualified
mechanic service or repair the forklift
BEFORE
placing it
into service again
Figure 6-27. Coolant Gauge.
Light Switch (Optional)
The Light Switch controls two (2) front cab lights, two (2)
boom lights, and one (1 ) rear cab light
Figure 6-28. Light Switch.
Turn Signal and Hazard Switches (Optional)
The Turn Signal Switch controls the turn signals (toggle
left or right) The Hazard Light Switch flashes all four (4)
turn signals (toggle up or down)
Figure 6-29. Turn Signal and Hazard Light Switches.
Rear Axle Centering Indicator
The rear axle centering indicator illuminates when the rear
wheels are aligned perpendicular to the rear axle The rear
wheels must be aligned perpendicular to axle in order to
change the Steering Select switch
If the rear axle centering indicator does not illuminate,
stop the forklift, follow proper shut down procedures,
tag the forklift with “Do Not Operate” tags, and have a
qualified mechanic service or repair the forklift BEFORE
placing it into service again
Figure 6-30. Rear Axle Centering Indicator.
Steering Select and 2-Wheel Rear Switches

Warning
DO NOT change steering modes until the forklift slows
or comes to a complete stop. Align all four (4) wheels
perpendicular to the axle, before changing steering
mode. Changing steering modes at higher travel
speeds can make the forklift unstable, and cause a loss
of control, which could result in death, serious injury,
or property damage.
The Steering Select switch has three (3) steering
positions: Crab, Two Wheel Steering (2W), and Four
Wheel Steering (4W) The 2-Wheel Rear switch has two (2)
positions : On and Off
Figure 6-31. Steering Select and 2-Wheel Rear Switches.