Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 34
UPS Management
which SNMP/Web adapter is Connected.
• Proxy Configuration
Specifically This Configuration only available via Web interface. This Configuration enables the Data Com-
munication via proxy Server. The configuration even supports proxy server with user authentication. The
default setting is No Proxy.
When the configuration is updated, it is recommended to save the new settings and reboot the adapter to make
sure the configuration is reloaded and the new settings applied.
NOTE
: Only HTTP Proxy servers including user authentication will be supported. Automatic Proxy Configuration
(.pac ) files are also not accepted. Please contact your Network Administrator for finding the proxy details and ac-
cordingly configure the Proxy settings. Any proxy configuration is changed, it is mandatory to save the new settings
and reboot the SNMP/Web adapter, otherwise there will be a Communication lost.
NOTE
: TCP port 443 should be kept open in case Encryption is enabled. Contact your Network administrator about
status of TCP port 443. Alternatively you can check from any standard web browser (with in the same LAN) and try
to connect to any external Secure Web site (ex: https://www.google.com)
GPRS Router Configuration
This Section is applicable for RM&D Service activation using GPRS Router . GPRS Router is required in case Ethernet
facility or shared internet connection is not available for SNMP/Web adapter . In this case Internet Connection can
be created using GPRS router with pre-activated SIM ( Subscriber Identity Module ) card.
Please approach GE Commercial team for the GPRS requirement. The router Supplied by the GE is fully compatible
with SNMP/Web adapter. RM&D service activation using GPRS Router is described as following,
Step 1
: Get a pre-activated SIM card with GPRS enabled. You can choose your preferred Network carrier for select-
ing the SIM card. The Data plan (GPRS Usage Charges) is as per your choice . In the default configuration ( assum-
ing 1 hour as Data Sending rate by RM&D Service ) , approximately 10MB/UPS/Month will be the uploaded data.
Step 2
: Activate the GPRS router supplied by GE using the pre-activated SIM card. Follow the GPRS router activa-
tion manual supplied along with Router. After Successful GPRS Activation , the „CD‟ LED will glow continuously
indicating the internet Connection availability.
Step 3
: Connect the SNMP/Web adapter to the GPRS router using the RJ45 Cable provided by the Router package.
Change the Boot method to DHCP and save the settings. Reboot the SNMP/Web adapter.
Step 4
: Connect the SNMP/Web adapter using Serial Connection (RS-232) cable. Please note that this cable is not
provided along with GPRS Router. Use any standard 1:1 serial communication cable for this purpose. Activate the
RM&D Service using the available Console Commands.
NOTES:
1.
GE is not supplying any SIM cards along with GPRS Router. In case required please approach the GE Commer-
cials for purchasing SIM card with activated GPRS Connection at extra cost.
2.
It is recommended to check the internet Connection availability after activating the GPRS Router and before
Connecting SNMP/Web adapter. This can be done by connecting the activated GPRS Router (indicated by the
„CD‟ LED ) to a nearest available Computer using the Standard RJ45 cable provided by the Router package. To
Check the internet Connection, open any standard Web browser from the Computer and access any external
website ( ex: try to open Google page, www.google.com).
3. Please check the DNS & IP Settings assigned to the SNMP/Web adapter are Correct and in the sub-domain as
GPRS Router
