XPRT-6kVA, XPRT-10kVA USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion® (XPC) Corporation (Rev 2/7/13)
Page 76
Xtreme Power Conversion® Load Protection Policy
THIS POLICY IS NOT A WARRANTY. REFER TO
THE XPC CORPORATION, INC. LIMITED WARRANTY
FOR INFORMATION
CONCERNING THE WARRANTY FOR YOUR XPC PRODUCT. THE LIMITATIONS AND CONDITIONS CONTAINED IN THIS
POLICY DO NOT AFFECT
THE TERMS OF THE XPC LIMITED WARRANTY.
Definitions:
1.
“Product” means a Standard 120, 208, or 240 Volt power protection device that is used in the United States and
Canada. This policy does not include custom manufactured products.
2.
“Power Disturbance” means an AC power line transient (telephone line or Local Area Network, if applicable),
spike or surge.
3.
“Connected Equipment” properly connected electronic equipment
4.
“Fair Market Value” of damaged Connected Equipment as determined by XPC shall be the lower of (a) the
average price the same or similar items are being sold for on eBay, (b) the price list of Orion Blue Book (or if
such price list is no longer published, a published or announced price list reasonably selected by XPC), (c) the
lowest price the same or similar items can be purchased for in the United States or (d) the total amount of all
payment(s) you have or are entitled to receive from insurance, other warranties, extended warranties, a legal
liability claim or from other sources or persons for the damaged Connected Equipment.
5.
“Purchaser” means the person or entity that originally purchased the Product from an authorized reseller or
distributor of XPC
Products.
The Purchaser of this Product is protected, for the term of the XPC Limited Warranty, against certain losses caused by a Power
Disturbance for properly connected electronic equipment (referred to as the "Connected Equipment") subject to certain terms and
conditions provided below.
This policy applies only to the original purchaser of the Product. If the Product is transferred or sold to another person or entity,
this policy is void.
Load Protection Policy Dollar and Period Limits
For purchasers that meet the qualifications and conditions set forth in this policy, XPC will provide reimbursement (cost of repair or
fair market value as determined by XPC) during the period limits and up to the dollar limits stated as follows:
PRODUCT
DOLLAR LIMIT
PERIOD OF COVERAGE
XVT
25,000
Term of XPC Limited Warranty
XST
25,000
Term of XPC Limited Warranty
XPRT 6kVA & 10kVA
50,000
Term of XPC Limited Warranty
NXRT
50,000
Term of XPC Limited Warranty
P80
50,000
Term of XPC Limited Warranty
P90
50,000
Term of XPC Limited Warranty
This Load Protection Policy is not deemed "first dollar" coverage. XPC’s obligation is reduced by any amounts that the Purchaser is
entitled to recover, from other sources regarding the Connected Equipment, including, but not limited to, insurance, other warranty,
extended warranty, or legal liability, regardless of whether or not the Purchaser makes a claim for recovery.
Eligibility for Coverage Under the Load Protection Policy
1.
The Product must be registered on the XPC website, www.xpcc.com, within 10 days of purchase. All required information
must be provided, and Purchaser should retain a copy for Purchaser’s records. When registering on the website,
Purchaser must list all connected equipment that is directly connected to the product. Only those devices registered in
that manner will be covered.
2.
All Connected Equipment must be UL or CSA approved.
3.
The Product must be plugged into a properly wired and grounded outlet. Use of input surge devices, extension cords,
adapters, ground wires, or electrical connections not manufactured by XPC voids the XPC Load Protection Policy. No
other surge protection device may be connected to the output sockets of the Product. The installation must comply with all
applicable electrical and safety codes set forth pursuant to the NEC.
4.
The Product must have undeniable physical evidence of a Power Disturbance that directly and proximately caused the
damage;
5.
The Connected Equipment must have been damaged by a Power Disturbance on a properly installed, grounded, and
National Electric Code, ("NEC"), code-compliant 120, 208, 240 Volt AC power line in the United States or Canada, by a
Power Disturbance on standard telephone land line or PBX telephone equipment line that is properly installed and
connected to an RJ11 port on the Product; or by a Power Disturbance on a standard Local Area Network connection that
is properly installed and connected to an RJ45 port on the Product and (d) is directly plugged into, and properly connected
to, the Product in its original condition which was properly operated when a Power Disturbance passed through the
Product and (i) exhausts the protection capacity of the Product or (ii) damages the Product.
