Xtreme Manufacturing XR1147 Скачать руководство пользователя страница 35

Страница: 35 / 76

Operation Manual

Operator Cab

or entangled in any portion of the seat assembly.

2. Pull the retractable seat belt across your lap. Position the

seat belt as low on your body as possible.

3. Insert the latch plate into the buckle (on the right side of

the seat) until a “click” is heard.

4. Make sure seat belt retracts snugly across your lap.

Seat Belt

Warning

Always check the condition of the seat belt

and mounting hardware before operating

the Telehandler. If the seat belt or mounting

hardware is defective, it may not properly

restrain the operator, which could result in

death or serious injury.
•

DO NOT operate the Telehandler until the seat belt or

mounting hardware is replaced, if worn or damaged.

•

The seat belt MUST be worn while operating the

Telehandler. Failure to wear the seat belt could result in

death or serious injury.

The Telehandler is equipped with a standard two inch (2”) wide

retractable seat belt. A three inch (3”) wide retractable seat

belt is available where required by local laws and regulations.

Figure 22. Retractable Seat Belt

Warning

DO NOT adjust the seat or seat belt while the

Telehandler is moving. Keep both hands on

the wheel while the Telehandler is moving

to prevent loss of Telehandler control which

could result in death or serious injury.

Before starting the engine, adjust the seat for position and

comfort (refer to the Operator Seat section of this manual) and

then adjust the seat belt as follows:
1. Grasp the free end of the seat belt (located on the left side

of the seat) and make sure the belt webbing is not twisted

Rear View Mirrors

Two (2) adjustable rear view mirrors are provided to aid the

operator’s rear vision. One (1) rear-view mirror is mounted on

the upper left of the operator’s cab.

Figure 23. Cab-Mounted Mirror

One (1) rear-view mirror is mounted on the right side of the

chassis.

Figure 24. Chassis-Mounted Mirror

Содержание XR1147













































































Результаты поиска

Содержание XR1147

Отзывы:

Похожие инструкции для XR1147

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR1147, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1147

Отзывы:

Похожие инструкции для XR1147

Бренды по названию

Популярные бренды