Operation
XTM40
18
6.9
Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
To defrost the cooler, proceed as follows:
➤
Remove the contents.
➤
If necessary, place them in another cooling device to keep them cool.
➤
Switch off the device.
➤
Leave the lid open.
➤
Wipe off the defrosted water.
6.10
Replacing the AC fuse
D
➤
Pull off the connection cable.
➤
Pry out the fuse insert (fig.
4
2, page 11) with a screwdriver.
➤
Replace the defective fuse with a new one that has the same rating (T4AL 250 V).
➤
Press the fuse insert back into the housing.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
XTM40-O-AUS.book Seite 18 Montag, 7. Januar 2019 2:30 14
