XTM Racing XST 4WD Truggy RTR Скачать руководство пользователя

Страница: 5 / 64

Page

8-Pack 'AA' Alkaline Batteries for Transmitter

4-Pack 'AA' Alkaline Batteries for Receiver

High-Quality After-Run Oil

XTM Racing Air Filter Oil

Nitro Car Cleaner

Metric Ruler

Small, Flat Blade Screwdriver and #1 and # 2 Phillips Head Screwdrivers

1.5mm, 2mm, 2.5mm and 3mm Hex Wrenches

5.5mm and 7mm Nut Drivers

Adjustable Wrench and Needle Nose Pliers

Assorted Weights of Silicone Oil to Tune the Shocks and Differentials (Optional)

rECOMMEnDED TOOlS AnD SUPPlIES, COnTInUED....

BECOMIng FAMIlIAr WITH yOUr

ST 4WD TrUggy rTr

In addition to the items listed previously, the following tools and supplies will also be required to run and maintain your

ST 4WD Truggy RTR:

Each radio control system comes with a sticker on the transmitter and on the receiver showing which frequency the radio control system
operates on (either in the 27MHz, 40MHz or 75MHz band). No two radio systems can operate nearby each other if they are on
the same frequency. You can purchase transmitter and receiver crystals separately and change them if you plan on running your

4WD Truggy RTR with other people.

27MHz and 75MHz

These frequencies are legal for use in North America

27MHz and 40MHz

These frequencies are legal for use in Europe,

but can vary from country to country

Antenna:

Transmits the signal from the transmitter to the receiver. The antenna should be completely extended during use.

Auxiliary Charge Jack:

For onboard charging when using rechargeable batteries (not supplied).

Battery Cover:

This cover houses the 8 'AA' Alkaline batteries (not supplied) that power the transmitter.

Channel 3 Button:

Used to operate a third function, like switching to reverse function on a model that features reverse. The channel

3 button is not utilised with the

ST 4WD Truggy RTR.

Crystal:

This is the frequency crystal of the transmitter. You can change crystals in both the transmitter and the receiver so that you

and your friends can drive at the same time. No two radio control systems nearby can be operated on the same frequency.

Digital Function Buttons:

Used to adjust steering and throttle trim, function changes, EPA, dual rates and servo reversing.

lCD Display:

Displays all menu screens for function updates, power level indicator, etc.

On/OFF Switch:

Turns the transmitter on and off. A red L.E.D. indicates that the transmitter is turned on. Voltage is displayed on the

LCD display.

Steering Wheel:

Controls your

ST 4WD Truggy RTR’s steering. Turn the wheel to the right and the

ST 4WD Truggy RTR turns

right. Turn the wheel to the left and the

ST 4WD Truggy RTR turns left.

Throttle/Brake Trigger:

Controls the speed and braking ability of your

ST 4WD Truggy RTR. Pull the trigger to accelerate, release

the trigger to decelerate, and push the trigger to brake.

For more information on the features and use

of your Cirrus 3CFM transmitter, please refer

to the separate User's guide provided.

note: The Cirrus 3CFM radio is not available on 75MHz.

Antenna

ON/OFF

Switch

Auxiliary

Charge Jack

Channel 3

Button

Battery Cover

Steering Wheel

Digital Function

Buttons

Digital Function

Buttons

LCD

Display

Crystal

Throttle/Brake

Trigger

Содержание XST 4WD Truggy RTR

































































Результаты поиска

Содержание XST 4WD Truggy RTR

Отзывы:

Похожие инструкции для XST 4WD Truggy RTR

Бренды по названию

Популярные бренды

XTM Racing XST 4WD Truggy RTR, Инструкция по эксплуатации и руководство по сборке

Результаты поиска

Содержание XST 4WD Truggy RTR

Отзывы:

Похожие инструкции для XST 4WD Truggy RTR

Бренды по названию

Популярные бренды