XTM Racing RAIL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 72

XTM Racing RAIL Скачать руководство пользователя страница 6

Page 6

bECOmING fAmILIAR WITh YOUR RAIL bRUShLESS Off-ROAD bUGGY

Use the photo and descriptions below to familiarise yourself with the Rail Brushless Off-Road Buggy's main chassis components.

Receiver Box

with Antenna Mount

Battery Holder

Wing

ESC On/Off Switch

Bumper

Battery Retaining Strap

Shock Tower

Brushless ESC

with Cooling Fan

Brushless Motor

with Heat-Sink

and Cooling Fans

Wheel/Tyre Assembly

Shock Absorber

Body Mount

Steering Servo

Steering Tie-Rod

Suspension Arm

Turnbuckle

ESC Battery Leads

n

Chassis Component Overview

Battery Holder:

Moulded out of impact-resistant nylon plastic, the battery holder firmly holds the battery pack(s) that power the Rail.

The battery holder is sized to fit most 6 cell Ni-Cd or Ni-MH battery packs and 2 ~ 4S Li-Po battery packs.

Battery Retaining Strap:

The battery retaining strap holds the Ni-MH or Li-Po battery pack(s) that powers the Rail securely in the battery

holder. The battery retaining strap makes it easy to remove the battery pack(s) and is adjustable to fit different size battery packs.

Body Mount:

Moulded out of high-impact nylon plastic for strength, the body mount supports the body. Five body mounts are featured

to secure the body firmly in place.

Brushless ESC with Cooling Fan:

The ESC is a solid-state device that takes power from the battery pack and the throttle signal from

the receiver and converts them into proportional power for the motor. The Rail features a high-quality 120 Amp brushless ESC that can
handle 6 ~ 12 cell Ni-Cds or Ni-MHs, or 2 ~ 4S Li-Pos. In addition, the ESC features a 3 Amp/6 Volt Battery Eliminator Circuit (BEC),
forward and reverse control, and a cooling fan that helps keep the ESC from getting too hot. The ESC can also be programmed using
the included ESC programming card.

Brushless Motor with Heat-Sink and Cooling Fans:

The brushless motor provides the power to the drivetrain. Brushless motors are

more efficient and produce more power than brushed motors. The Rail features a powerful 2370kV brushless motor that includes a
heat-sink and dual cooling fans to help keep motor temperatures under control.

Bumper:

Moulded out of impact-resistant nylon plastic, the bumper protects the chassis from most head-on impacts.

Centre Differential:

The centre differential transfers power between the front and rear gearboxes. The centre differential can be tuned

for specific conditions using different weights of silicone oil.

ESC Battery Leads:

The ESC battery leads are where you plug your battery pack in to power your Rail. The ESC battery leads feature

high-quality 12 AWG silicone wire and gold-plated 4mm male Bullet connectors.

ESC On/Off Switch:

Turns the ESC 'ON' and 'OFF'. The ESC On/Off switch features a 'SET' button, which is used in the throttle control

range calibration feature. For more information, see page 11.

Receiver Box with Antenna Mount:

This is where the receiver is mounted. The receiver box protects the receiver from dust, dirt and

debris. The top of the receiver box features an antenna mount that the plastic antenna tube fits into. The receiver box is

not

waterproof.

Continued On Next Page

Roll Cage

Centre

Differential

*Roll cage shown in the opened position. Features

and specifications subject to change without notice.

«
...
4
5
6
7
8
...
»

Содержание RAIL









































































Отзывы:

Нет отзывов