Page 4
These products must
not
be disposed of with other household waste. Instead, it is the user's responsibility to dispose of these
products by handing them over to a designated collection point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of these products at the time of disposal will help to conserve natural resources and ensure that
they are recycled in a manner that protects human health and the environment. For more information about where you can take
these products for recycling, please contact your local city or municipal office, your household waste disposal service, or where
you purchased the product.
Lithium Polymer (Li-Po) batteries are significantly more volatile than Alkaline or Ni-Cd/Ni-MH batteries used in R/C applications.
When using Li-Po batteries to power your model, all instructions and warnings must be followed closely. Mishandling of Li-Po batteries
can result in fire. In addition to the general Li-Po battery warnings below, be sure to understand and follow the warnings included with
the particular Li-Po batteries you use.
l
ALWAYS follow the instructions included with your Li-Po batteries and/or Li-Po charger to charge Li-Po batteries.
l
DO NOT attempt to charge Li-Po batteries with any charger other than a charger designed to charge Li-Po batteries. The Li-Po battery
charger you use should include a balancing feature.
l
DO NOT leave Li-Po batteries unattended during the charging process.
l
ALWAYS charge Li-Po batteries on a fire-resistant surface and NEVER charge Li-Po batteries near any flammable material.
l
DO NOT use or charge Li-Po batteries if they are hot to the touch.
l
DO NOT leave Li-Po batteries in direct sunlight or in a hot car or storage area, or allow Li-Po batteries to be exposed to moisture.
l
DO NOT short-circuit Li-Po batteries.
l
DO NOT leave Li-Po batteries plugged into your model when not in use. Li-Po batteries should be stored in a fire-proof container.
l
ALWAYS let Li-Po batteries cool between uses and charging.
l
INSPECT Li-Po batteries before each use for swelling or other malformation. If damaged, they should not be used.
l
DO NOT poke, bend or otherwise damage Li-Po batteries. DO NOT short-circuit.
l
DO NOT allow Li-Po batteries to ever exceed 71ºC (160ºF) for any reason.
SAfETY WARNINGS AND ImPORTANT INfORmATION
n
Alkaline, Ni-Cd, Ni-MH, and Li-Po Battery Instructions for Disposal
n
Lithium Polymer (Li-Po) Battery General Warnings
KIT CONTENTS
After opening your Rail Brushless Off-Road Buggy, remove all of the parts from the box and double-check that you have all of the items
listed below. If you find a part is missing or damaged, please contact your regional distributor, using the Customer Service Information
on page 3.
l
Tyres and Wheels (Glued)*
l
Body Clips (5)*
l
Decal Set
l
Receiver Antenna Support Tube
l
4mm Female Bullet Connectors (1 Pair)
l
Suspension Plate Holders
l
Allen Keys and Wrenches
l
Instructions for Radio Control System
l
Instructions for ESC/ESC Programming Card
l
Rail Chassis with Electronics
l
Transmitter
l
ESC Programming Card
l
Lexan Body Shell (Printed)*
l
Nylon Wing with Retaining Clip*
*May come installed on chassis and not loose in the box.
The brand and type of radio control system (transmitter, receiver, and steering servo) included with your Rail varies by region.
Please make sure to read through the separate radio control system Operating Manual included to learn about your radio control
system's features and proper use.
Kit contents are subject to change at any time without notice.
IMPORTANT:
If you drive your Rail in sand, we strongly recommend using the optional foam filter over the motor heat-sink fans
to keep sand out of the fans. For more information, see the Option Parts List on page 67.