XTline XT106400, Руководство пользователя

Страница: 55 / 58

a) Screws
b) Offset
base plate
c) Upper
section of
the offset
base
1) Bar type grip (optional
accessory)
2) Grip attachment (optional
accessory)
3) Offset base plate
4) Trimmer base assembly
(optional accessory)
1) Screw
2) Knob type grip
3) Offset base plate
• When using as a router, hold
the tool firmly with both hands
1) Plunge base
2) Grip
1) Screw
2) Knob
Mount the trimmer base with
four screws and the grip
attachment (optional accessory)
with two screws on the offset
base plate. Screw a bar type grip
(optional accessory) onto the
grip attachment
In another way of use, the knob
type grip which is removed
from a plunge base (optional
accessory) can be installed on
the grip attachment. To install
the knob type grip, place it on
the grip attachment and secure
it with a screw.
When using as a router only
with a plunge base (optional
accessory
To use the tool as a router,
install the tool on a plunge base
(optional accessory) by
pressing it down fully. Either
knob type grip or bar type grip
(optional accessory) can be
used according to your work.
To use the bar type grip
(optional accessory), loosen the
screw and remove the knob type
grip
1.. Bar type grip
(optional accessory)
Offset base (optional accesory) can
also be used with a trimmer base
and a grip attachment (optional
accesory) for more stability
Loosen the screws and remove the
upper section from the offset base.
Put aside
Offset base is not included