CUSTOMER SERVICE 1-888-707-1880
20
Dyaco Canada Inc.© 2020
Email: [email protected]
10.
User Define mode
：
In standby mode, press
【
LEVEL
＋
/LEVEL
－】
to select USER DEFINE,
and press
【
ENTER
】
. Or, press
【
INTERVAL
】
quick key to enter this mode directly. User may
press
【
LEVEL
＋
/LEVEL
－】
and then press
【
ENTER
】
to create his own profile from column 1
to column 20 (image 33). The heart rate window will display the number of rows, and the load
window will display the load value for the current setting. After finishing the load value setting,
press
【
ENTER
】
to set INCLINE value (image34). There are twenty rows of INCLINE setting.
press
【
LEVEL
＋
/LEVEL
－】
to set INCLINE value, and press
【
ENTER
】
again to set next row.
The heart rate window will display the number of rows, and the load window will display the
incline value for the current setting. After incline setting, press and hold
【
ENTER
】
to enter
TIME setting (image 35). Then, set target TIME by pressing
【
LEVEL
＋
/LEVEL
－】
to adjust.
After that, press
【
START
】
to start workout, and press
【
LEVEL
＋
/LEVEL
－】
to adjust the load
during workout. Press
【
INCLINE
＋
/ INCLINE
－】
to adjust incline, press
【
STOP
】
to pause
workout, and press
【
STOP
】
again back to the standby mode. When preset the target TIME, the
target value count down to zero, the workout will be stopped, and all the values stop counting.
Press
【
STOP
】
to leave this mode and return to standby mode.
image 33 image 34 image 35
11.
INCLINE calibration
：
In standby mode, press
【
ENTER
】
and
【
I
】
for 2 seconds to enter
the auto-calibration mode. (image 36)
。
image 36
12.
Factory Setting mode
：
In standby mode, press
【
ENTER
】
and
【
LEVEL
＋】
for 2 seconds to
enter factory setting mode. In this mode, press
【
LEVEL
＋
/LEVEL
－】
to select, and press
【
ENTER
】
to the next setting. When the last option is setted by press
【
ENTER
】
, or press
【
STOP
】
during setting, the setting value will be stored and restarted.
Option item
：
1. UNIT(KM/ML)
－
Set to English or Metric displayreadings
2. BRIGHT(0~15)
－
Adjust backlight brightness
3. SPECIAL(YES/NO)
－
Pull wire motor for special drive action
4. MAX LOAD(16 20 24 32)
－
Set the maximum resistance value
5. UX DATA(ON/OFF)
－
4 sets of user option switches
6. WHEEL(10~99)
－
Wheel setting
7.
INCLINE LOAD(1~20)
－
Set the maximum Incline
