![background image](http://html.mh-extra.com/html/xterra/16004009000/16004009000_owners-manual_890302015.webp)
Customer Service 1-888-707-1880
14
Dyaco Canada Inc. 2020
Email: [email protected]
SERVICING AND MAINTENANCE
FIGURE 7. LUBRICANT OILING USAGE INSTRUCTION
Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply
silicone spray or other substances to the walking belt or walking board. Such substances will
deteriorate the walking belt and cause excessive wear.
The running belt of the treadmill has been lubricated with the appropriate lubricant before
packaging. However, this treadmill will need maintenance by refueling in order to ensure the
normal use and reduce the abrasion of components. Follow the below lubrication process.
Step 1: How to apply the lubricant?
Remove the end cap from the motor cover (as shown) and refill the lubricant down the oil filling
pipe through the hole. To let the lubricant adhere evenly to the running belt, it is suggested to
start the treadmill running at low speed (under 3 KM/H) for 5~10 minutes during the lubrication
process. When finished, replace the end cap.
Attention: 1. After refilling, hold down the STOP key for 5 seconds to delete the
OIL reminder shown on the display.
2. Do not fold up the treadmill for 30 minutes after refilling to avoid the
lubricant flowing out of the treadmill.
Step 2: How often to oil?
When the travelled distance of treadmill reaches to 100KM an “OIL” indicator will display
itself as a reminder. This indicator means you need to add 20ml of lubricant.
When the treadmill is used less than 10KM a day for a period of three months it is
necessary to add with 15ml lubricant.
le of lubricant in the box.