XtendLan XL-VCF104M, Руководство пользователя

Страница: 6 / 73

General Rules
Before making any connections to the VDSL2 CO&CPE MODEM, note the following rules:
● Ethernet Port (RJ-45)
All network connections to the Modem Ethernet port must be made using Category 5 UTP for 100Mbps;
Category 3,4 UTP for 10Mbps
No more than 100 meters of cabling may be use between the MUX or HUB and an end node.
● Phone Port (RJ-11)
All Phone set connections to the RJ-11 Port made using 24~26 Gauge phone wiring.
Connecting the VDSL2 CO&CPE MODEM
The VDSL2 CO&CPE MODEM can be controlled by a PC, henceforth, called the "Control PC". For this purpose, you
needa PC with an Ethernet network interface and a DB-9 RS232 serial interface. Two programs are required: A Web
browser is mandatory and a terminal program should be available optionally. The board has several connectors.
4 Ethernet RJ45 jacks (connect LAN devices to route); the Auto MDIX feature of the ports switches automatically
between MDI and MDI-X (MDI = Media Dependant Interface), therefore straight Ethernet cables can be used.
2 x RJ11 jack (LINE Port is for connects VDSL client side to Line Interface, Phone port is for connects phone set or
FAX machine)
1 x Console port (monitoring, access to operating system via shell for firmware downloads, starting drivers and web etc.,)
1 Power Supply (as described above)
5