XtendLan xl-raid-2804issa Скачать руководство пользователя страница 69

Страница: 69 / 124

Sometimes, rebuild is called recover; these two have the same meaning. The following table is the

relationship between RAID levels and rebuild.

RAID 0

Disk striping. No protection of data. VG fails if any hard drive fails or

unplugs.

RAID 1

Disk mirroring over 2 disks. RAID 1 allows one hard drive fails or

unplugging. Need one new hard drive to insert to the system and rebuild

to be completed.

N-way mirror

Extension to RAID 1 level. It has N copies of the disk. N-way mirror allows

N-1 hard drives fails or unplugging.

RAID 3

Striping with parity on the dedicated disk. RAID 3 allows one hard drive

fail or unplugging.

RAID 5

Striping with interspersed parity over the member disks. RAID 5 allows

one hard drive fail or unplugging.

RAID 6

2-dimensional parity protection over the member disks. RAID 6 allows two

hard drives fails or unplugging. If it needs to rebuild two hard drives at the

same time, it will rebuild the first one, then the other by sequence.

RAID 0+1

Mirroring of the member RAID 0 volumes. RAID 0+1 allows two hard

drives fails or unplugging, but at the same array.

RAID 10

Striping over the member RAID 1 volumes. RAID 10 allows two hard

drives fails or unplugging, but at different arrays.

RAID 30

Striping over the member RAID 3 volumes. RAID 30 allows two hard

drives fails or unplugging, but at different arrays.

RAID 50

Striping over the member RAID 5 volumes. RAID 50 allows two hard

drives fails or unplugging, but at different arrays.

RAID 60

Striping over the member RAID 6 volumes. RAID 60 allows four hard

drives fails or unplugging, but each two at different arrays.

JBOD

The abbreviation of

“J

ust a

unch

isks

”

. No protection of data. VG

fails if any hard drive fails or unplugs.

Содержание xl-raid-2804issa





























































































































Результаты поиска

Содержание xl-raid-2804issa

Отзывы:

Похожие инструкции для xl-raid-2804issa

Бренды по названию

Популярные бренды

XtendLan xl-raid-2804issa, Руководство по установке и настройке

Результаты поиска

Содержание xl-raid-2804issa

Отзывы:

Похожие инструкции для xl-raid-2804issa

Бренды по названию

Популярные бренды