Coax MDU Master Bridge User’s Guide
ping
[
-n
<count>]
[
-w
<timeout>]
[
-l
<pktlen>]
address
ICMP ping function,
<count>
: number of ping requests(max 65535)
<timeout>
: expiry timer in each reply(1~60 sec)
<pktlen>
: sent packet length(64~1500)
address: target IP address
reboot
Reboot system, exclude Master HCNA device.
rmep
<mac>
Remove designated EP
Properties Profile
.
<mac>
: EP MAC
<mac>
to be removed
service
[
-s
<telnet/http>
[
-c
<on/off>]
[
-p
<port
)
>]
[
-t
<idle>] ]
Display or set up Telnet and Http service.
<telnet/http>
: configure Telnet or Http
<on/off>
: enable or disable this service
<port>
: TCP port number (0~65535)
<idle>
: expiry timer to logoff automatically (0~32767 sec)
default
300
seconds
showep
[
-f
]
[
-n
<note>]
[
-m
<mac>]
Display EP connection status and properties, and check if it
matches the stored
Properties Profile
in XL-HCW128C.
-f: force to re-scan all connected EPs
-n: display EP with matched
<note>
-m: display EP with MAC address
<mac>
showlog
Display the (Syslog) logged messages.
showmaster
Display Master HCNA information, include driver version,
properties(Privacy Mode, Privacy Key)
snmp
[
-c
<act/deact>]
[
-p
<port>]
[
-n
<name>]
[
-t
<contact>]
[
-l
<location>]
[
-r
<rcomm>]
[
-w
<wcomm>]
Display or set up basic SNMP system configuration.
<act/deact>
: activate(enable) or de-activate(disable) SNMP
agent
<port>
: SNMP UDP port number (0~65535), default
161
<name>
: SNMP system name
<contact>
: SNMP system contact information
<location>
: SNMP system location information
<rcomm>
: SNMP system read-only community name, default
‘
public
’
<wcomm>
: SNMP system read-write community name, default
‘
private
’
snmptrapserver
[
-s
<set>
[
-c
<act/deact>]
[
-p
<port>]
[
-a
<ip>]
[
-m
<community>] ]
Display or set up SNMP trap server(s) configuration.
<set>
: trap server index, at most 5 servers (0~4)
<act/deact>
: activate or de-activate trap server IP
<ip>
<port>
: SNMP trap UDP port number (0~65535), default
162
<ip>
: trap server IP address
<community>
: trap server community name, default ‘
public
’
snmptrapsetup
[
-l
<on/off>]
[
-u
<on/off>]
[
-s
<on/off>]
[
-d
<on/off>]
Enable or disable specified trap type,
<on/off>
: turn on or turn off this trap type, default is
on
-l: logon/logoff trap
-u: upload/upgrade firmware/driver trap
-s: EP on-line status changed trap
-d: EP diagnosis trap
sntp
[
-c
<act/deact>]
[
-r
<refresh time>]
[
-z
<time zone>]
[
-s
<set> -a
address
]
Display or set up SNTP configuration for
System Time
.
<act/deact>
: activate or de-activate SNTP service for system
time
<refresh time>
: query SNTP server period, default
60
minutes
<time zone>
: ‘+
hh
:
mm
’ or ‘-
hh
:
mm
’ to GMT time,
hh
for hours
and
mm
for minutes, default ‘
+00:00
’
<set>
: 2 registered SNTP server set(0~1)
address: SNTP server host name or IP address in current set
stat
[
-r
]
Display port statistics, include LAN1/LAN2/HCNA.
-r: reset all port statistics counter to 0
swconfig
[
-p
<lan1/lan2>
[
-s
<auto /10h /10f
/100h /100f>] ]
Display or set up Ethernet port LAN1/LAN2 properties.
<lan1/lan2>
: configure LAN1 or LAN2 port
<auto>
: auto-negotiation mode
<10h>
: 10Mbps, half-duplex mode
37
www.xtendlan.com
