For example,
Coax MDU Master Bridge User’s Guide
To access your listed SNTP server by its domain name instead of IP address, the ‘
DNS Server
’ and ‘
Default
Gateway
’ in ‘
System Setup
’ window need to be set up correctly. In order for XL-HCW128C to access the SNTP
server by its domain name.
Static MAC
It may be necessary to bind and secure the server/gateway MAC addresses to port LAN1/LAN2 of XL-HCW128C
for security. Static MAC is using to prevent MAC-spoofing-attack in Ethernet network. For example,
We bind MAC address 00-01-40-fe-ed-01 to port LAN1 and MAC address 00-01-40-fe-ed-02 to port LAN2,
Reboot System
Reboot Master XL-HCW128C only. EP untainted.
Default Setting
Restore all settings of XL-HCW128C to factory default, including username/password, IP address, privacy
mode/key, etc. Press ‘Reset’ button locally for lasting 5 seconds works alike. XL-HCW128C will reboot afterward.
Upload Firmware
Upload ‘
Bootcode
’ / ‘
System firmware
’ / ‘
Master driver
(3110)’ / ‘
EP driver
(3010 or 3110)’ / ‘
Diagnosis
utility
’ onto XL-HCW128C ‘
Upload Area
’. Not functional yet, wait to ‘
Activate Firmware
’ or to ‘
Upgrade
’ driver.
Refer the following “
Example to Upload then Activate System Firmware and HCNA Driver
” for more details.
23
www.xtendlan.com
