Coax MDU Master Bridge User’s Guide
Administrator
For each account, 3 level of privilege is provided: Superuser, Read, and ReadWrite. The unchangeable username
‘admin’ always have the ‘Superuser’ rights.
To add user account, you need to have the ‘Superuser’ privilege,
Allowed Source
Factory default filter set for the ‘IP address’ is ‘
0.0.0.0
’ and the ‘Subnet Mask’ is ‘
0.0.0.0
’ in ‘
Allowed Source
’
setting. If the incoming packet fulfills the following criterion, XL-HCW128C will accept the management packet,
else discard it.
(
Incoming Source IP Address
&
Subnet Mask
) = (
IP Address
&
Subnet Mask
)
For the factory default setting, it will accept all incoming packets.
For example, the following filter set permits all Hosts with IP address ‘192.168.1.xxx’ to access and configure
XL-HCW128C,
20
www.xtendlan.com
