manualshive.com logo in svg

XtendLan XL-GRT402S, Руководство пользователя

Поделиться
Скачать
XtendLan XL-GRT402S Скачать руководство пользователя страница 45

XtendLan G.SHDSL.bis Router XL-GRT402S, XL-GRT404S, User Manual 

  

The following bridge information is displayed:  

 

1. Bridge MAC Address  

 

2. Number of bridge interfaces configured  

 

3. Type of the Bridge  

 

4. Unicast learning which is non-configurable, and always set to Hybrid, i.e. VLAN 

learning is both “Independent” as well as “Shared” depending on the association 
of VLANS with filtering databases.  

 

5. Multicast Learning setting which is non-configurable and always set to 

HVM(Hybrid VLAN Multicast Learning), i.e. if two VLANs are associated with the 
same FDB, the filtering information for a multicast MAC address in one VLAN 
would be used in the forwarding decision for the same MAC address in the other 
VLAN too.  

 

6. Config Pvid Status which is non-configurable and is always true, i.e. the bridge 

supports the ability to override the default PVID setting and its egress status 
(VLAN tagged or untagged) on each bridge interface.  

 

7. Tagging which is non-configurable and always enabled, i.e. each bridge 

interface supports 802.1Q VLAN tagging of frames.  

 

8. AcceptableFrameTypeCfg which is non-configurable and always enabled, i.e. 

each bridge interface can be configured to accept all frames or only tagged 
frames.  

 

9. IngressFilteringCfg which is non-configurable and is always enabled, i.e. each 

-45- 

Содержание XL-GRT402S























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды