4.2.1
Preset Position Parameter Setting
speed dome camera has the capacity to set up to 128 preset positions through the keyboard. It can
set a running speed at each preset position from 0.4/s to 280/s (1-64grades) and dwell time from
(1-60seconds).
Note: speed dome can rotate at low speeds and at fast speeds. Its speed can be divided into 64
grades. 1 is the lowest speed and 64 is the fastest speed.
To get to the control keyboard Main Menu Press Exit until the screen displays:
1. In the Main Menu, Press the SHIFT+EXIT key. Keyboard displays:
Press CLR to delete previous data. Input
required SPEED DOME address code XXXX
（
1-1024
）
for control. Press Enter for
2. Enter the correct Speed Dome Unit and Press Enter.
Example: Preset Position for Speed Dome 3. Keyboard displays:
Displays
the Speed
Dome
Address (1-1024)
3. Now the control Keyboard displays:
Preset position (1-128)
Running
speed
(1-64)
Dwell time(1-60)
Press
Shift+MON
key
key on the keyboard to move the cursor up and down
4. Press CLR key to delete previous data before programming to a new preset position.
5. Enter desired Preset Position and Press Enter.
6. Press
Shift+MON
to get to Speed. Using the number keys enter the desired running speed.
7. Press
Shift+MON
to get to Time. Using the number keys enter the desired dwell time.
For example: Set the running speed of preset position No. 6 as Grade 64 (fastest speed), dwelling time
is 5 seconds. Set the running speed of preset position No.2 as Grade 10, dwelling time is 10seconds.
1. Press the SHIFT+EXIT key.
2. Press CLR to clear the data.
3. Input 06 (Note: Setting the Preset Position No. 6) press the Enter Key to Confirm.
4. Press the
Shift+MON
key
to
move
the
cursor
to
Speed:00
←
5. Input 64, press Enter
6. Press the
Shift+MON
key
to
move
the
cursor
to
Time:00
←
7. Input 05, press Enter
Содержание SDOME4802201
Страница 12: ......
