Connection (Outer Connecting Wire)
Connect BNC video interface of dome camera with video wire (BNC) which is finished installing.
Connect power supply line with power line (AC24V) which have been set well.
Electricity
●
Check the polarity of the plug and outlet, then check all connecting wires.
●
Domes enter self-inspection, and make a horizontal 360° and tilt 90° rotation to
test
camera lens, dome horizontal and tilt electronic& mechanical structure. Then carry out a
replacement program rotating to starting point. After the dome stops completely, the
self-inspection is completed and dome is ready to be controlled.
Dome Mounting
●
Use soft cloth to wipe off dust and smudges of transparent dome cover, avoid scratching it
●
Align two holes on the dome cover edge with the two connection points of the metal upper
housing.
.
4
Control Keyboard Control Use Instruction to Speed Dome Camera
Use the keyboard controller to realize the complete potential of the speed dome. (The control keyboard
control protocol is set as the default protocol for the speed dome.)
4.1
Setting and Adjusting Preset Position
The Preset function is the dome's default level angle, lean angle and camera focal length in EMS
Содержание SDOME4802201
Страница 12: ......
