(1) Try to avoid exposing VDP to bad environment, such as condensation, high
temperature, greasy dirt, dust, corrosion, direct sunlight and etc.
(2) If there is abnormality after you plug in, you should unplug it immediately
and unplug the device from power supply. You may plug in thedevice to
power supply after troubleshoot.
(3) Device installation and test must be done by professional staff. If there is
any malfunction or failure, please do not try to dismount or x it by yourself,
and please contact after-sales department for assistance.
Please refer to Figure 5-1 as guide.
Chart 4-1
Figure 5-1
Device
Install ation
Guide
No
.
Name
Description
1
Alarm Interface 8-ch alarm, please see tag for details
2
Communication
Port
May directly connect to network cable or via
corridor exchanger
3
Handset
Interface
Only models with earphone have this interface.
4
Power Interface
Connect to 2-pin with 3.81 mm interface, 12V power
