2.5.1
. 1 U s e r S e t u p
User setup includes password setup, display setup, bidirectional talk setup,
DND setup,restore default settings, a touch screen sound button plus touch
screen clean button setup.
1. Password setup: includes passwords for user, arm, disarm with default
123456 and anti-attack password with default 654321.
2. Display setup: includes brightness (1-9), screensaver waiting time (from
30s to 1800s with every 30s as an interval).
3. Ring setup: ring selection for incoming call (.pcm format), alarm ring
selection (.pcmformat), volume (0-10).
2 . 5 . 3 P r o d u c t I n t r o d u c t i o n
This section mainly introduces product function and problems may encounter
during usage.
2.6
Unlock
Function
Under incoming call from door station, call with door station and VDP
monitoring door station, press unlock button to remotely unlock door.
2.7
Arm
/
Disarm
Function
Under arm/disarm status, click arm button at the lower right corner of main
menu, and then select 1 from the 4 modes available (away, in, sleep and user
mode). The password box pops up, and you need to input password for arming.
System will enter arming status after delay ends. If you select instant arming,
system will enter arming right after sound stops.
Under arm status, click disarm button at the lower right corner of main menu
and password box pops up. You need to input password for disarming. If you
input correct password, the system will disarm; if you input incorrect password,
you will see a message saying “incorrect password, please try again”.
4. Bidirectional talk setup:
Door station ring duration (15s, 30s, 45s,60s,90s,120s, adjustable);
VDP ring duration (15s, 30s, 45s,60s,90s,120s, adjustable);
Door station call duration (15s, 30s, 45s, 60s, 90s, 120s, adjustable);
VDP call duration (5 min, 10 min, 15 min, 30 min, 45 min, 60 min, adjustable);
Monitoring duration (15s, 30s, 60s, 90s, 120s, 180s, 300s, adjustable);
5. DND setup: select from 0 hour (0H), 1 hour (1H), 2 hours (2H), 4 hours (4H),
8 hours (8H) and 24 hours (24H) to block out local ring.
6. Restore default settings: restore all user settings to default.
7. Touch screen sound button: may select to have sound or not when you
touch screen.
8. Touch screen clean button: after you turn on this option, the screen will
be off in 45s which allow you to clean it up with a piece of dry cloth. 45s later,
the screen will resume to normal status. You may exit anytime during the 45s
by pressing unlock button.
2.8
Screen
Cali bration
Function
This product screen was calibrated before shipped out. If you cannot activate
icons on screen when you touch it, please press arm, and the product
will enter screen calibration interface. Following the cursor, click on the 5 cursors
in sequence to complete screen calibration. Once you have done, system will
say screen calibration succeeds.
2.5.2
. 2 P r o j e c t S e t u p
This setup includes device info, network terminal, restore default settings.
1. Device info: includes room number, IP address, subnet mask, default
gateway, MAC address,and version info.
2. Network terminal: includes door station name, device type, door station
ID (manufacture use only), door station IP address, network port number,
working status. You may edit each item by clicking it (a numeric keyboard pops
up). After you complete setup, click the OK button on numeric keyboard.
3. Restore default settings: restore all project settings to default.
8
9
