Installation and Operation Manual
15
Making a Test Tape
The easiest way to verify MUX-1602C system operation is to
make a
test recording and play it back. This process effectively
tests every
piece of equipment in the system.
Before proceeding with the test tape, complete both the monitor
calibration and camera check procedures. Make sure the MUX-
1602C
monitor and all system cameras are correctly adjusted.
This helps
ensure the best results during the tape test.
The tape test procedure is as follows:
1.
Place the VCR in the record mode at the 24-hour speed. (This
is the MUX-1602C’s default VCR record speed and can be
changed.)
The VCR begins recording multiplexed camera
video. You
may select any viewing mode or display
format while
recording. This will not affect the tape because camera
recording and display are independent operations.
2.
After several minutes, stop the VCR and rewind the tape.
3.
Place the VCR in the play mode.
4.
Press the
tape button on the MUX-1602C.
When the MUX-1602C detects the encoded VCR signal, it
configures
itself for tape playback and displays all recorded
cameras in the
multicamera format. To view one camera full
screen, press the
corresponding
camera
button. To view
multiple cameras, press
the desired display format button (PIP,
2 x 2,
3 x 3,
4 x 4). If the
camera or cameras do not appear, check
VCR operation and review
all video connections.
This completes the tape test. If the test is not successful, repeat
the steps outlined above. If you still have problems, see
Appendix
C
— In Case of Trouble.
