37
[Snapped files saving mode]: DVS snapped pictures can be saved via
E-mail sending or FTP uploading. E-Mail server can be set up in [Mail Settings],
FTP server can be set up in [FTP Settings].
After set all the parameters, click [save] to make the parameters valid.
4.7
Front-end Settings
Below picture is the “Front-end settings” page of DVS:
[Serial port settings]: When DVS is connected to RS485 (or RS232)
communication or control device (e.g. PTZ decoder, dome camera), the
parameters of RS485 (or RS232) need to set according to the settings of the
communication control device (address, protocol, baud rate), and the
corresponding protocol need to be downloaded.
Note:
Only when the parameters and protocol are correctly set that the control of
add-on communication control device can be implemented.
[PTZ decoder protocol]
Decoder address: 1~255.
Built-in protocol: echo the built-in protocol name of current DVS.
PTZ decoder protocol files uploading: to upload the decoder/dome camera
communication protocol selected by users. The system supports hundreds of
decoder/dome camera communication protocol. It can also be defined by users
according to the standard format of protocol.
After set all the parameters, click [save] to make the parameters valid.
4.8
Local Settings
Below picture is the “Local Set” page of DVS:
