29
Record packing duration= Alarm du duration set in linkage recording
parameters.
[Set detective area]: Left click and drive the mouse to set the surveillance
areas (4 areas at most).
[All]: Set the whole video as motion detection area.
[Clear]: Clear all motion detection area.
After set all the parameters, click [save] to make the parameters valid.
4.4.5
Network Settings
1.
Basic Settings
Below picture is the “network settings” page of DVS:
[Basic Parameters]
IP Address: Set the device IP of DVS
Subnet mask: Default value is 255.255.255.0 (users are recommended not
to change it)
Gateway: Set the gateway IP of DVS, for example when the device is
connected to WAN via a router, the gateway IP is the router IP.
Physical address: The MAC address of DVS (users are recommended not
to change it).
Data port: Default value is 5000 (users are recommended not to change it).
Web port: Default value is 80 (users are recommended not to change it).
Multi-cast IP: Send the IP address of multi-cast data. The range is
224.0.0.0~239.255.255.255.
Multi-cast port: Default value is 5000 (users are recommended not to
change it).
DNS address: Please use DDNS function to set the DNS address as your
local DNS address.
Note:
