XTA 4 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 58

XTA 4 Series Скачать руководство пользователя страница 6

Page 6

4 Series

4 Series

4 Series

4 Series

Operator’s Manual

An example of this equipment has been tested and found to comply with the following European and
international Standards for Electromagnetic Compatibility and Electrical Safety:

Radiated Emissions (EU): EN55013-1 (1996)
RF Immunity (EU):

EN55103-2 (1996) RF Immunity, ESD, Burst Transient, Surge, Dips &Dwells

Electrical Safety (EU):

EN60065 (1993)

Important Safety Information

Do not remove Covers.
No user serviceable parts inside, refer servicing to qualified service personnel.
This equipment must be earthed.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT EXPOSE TO RAIN, MOISTURE,

DRIPPING OR SPLASHING

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS ENLEVER

NE PAS EXPOSER A LA PLUIE NI A L’HUMITE

Objects containing liquids, such as vases, must not be placed on this equipment.

It should not be necessary to remove any protective earth or signal cable shield connections.

Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wider blade and the third prong are
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.

Only use this equipment with an appropriate mains cord.

In the USA the cord should comply with the requirements contained in the Standard for Cord Sets and Power Supply
Cords, UL 817, be marked VW-1, and have an ampacity rating not less than the marked rating of the apparatus.

«
...
4
5
6
7
8
...
»

Содержание 4 Series



























































Отзывы:

Нет отзывов