17
The CT250A/300A has a rotating
positioning body, which can be
adjusted by loosening the L-type
handle.
After adjusting the handle to a
suitable position, the L-type
handle is locked to complete
the angle adjustment of the
handle.
At the same time, by pulling the
positioning pin, the back panel
can be extended and retracted,
and the height of the armrest can
be adjusted.
The strap holder can be
removed and installed at any
height, suitable to fix goods of
different heights.
3.4 Operate on Flat Ground
3.4.1 Operate on flat ground
The bottom of CT250/300/250A/300A
has casters for walking on flat
ground. Adjust the loading board to
the smallest angle, which will enable
the casters touch the ground. And
then the operator can push the
handle to move
