25
loading board, in the initial position of going upstairs, only the
point switch needs to be controlled, and no other operation is
needed.
3.7 Turning operation on flat ground or platform
Switch the stair climber to the load board adjustment mode, operate
the point switch, close the loading board, and make the wheel landed
on ground completely. Then it can be moved on flat ground.When the
steering is complete, follow the above instructions for moving up or
down.
3.8 Parking
NOTE——Turn off the power switch of the battery after
each use! Remove the battery if the machine will not be used for a
long time.
When parking, ensure that
CT250/300/250A/300A is
stored on the horizontal
ground, press down the front
universal wheel brake, stable
and non-shaking. If there is
any possibility of
CT250/300/250A/300A sliding
on the storage ground,
adjust the loading plate
angle to make crawler
landed to avoid machine
slipping.