21
balance position gradually in which
the CT250/300/250A/300A can be
easily moved forward and
back.When the
CT250/300/250A/300A reaches the
balance position, both hands shall
hold the CT250/300/250A/300A
handle, slowly pull the CT250/300A
/300A forward a little bit, and keep
the balance, so that the
CT250/300/250A/300A automatically
adjusts the Angle of loading plate,
until the track is fullly touch the
loading plate.
Then use the point switch to
move and complete the upstairs
operation.
Warning: There is potential risk when CT250/300/250A/300A
moves up to the highest stair on every floor. CT250/300/250A/300A
may roll over forward or backward. Keep people and goods far
away the machine. When a rollover is inevitable, loosen the
armrest and dodge in time.
Note: When the loading board automatically adjusts the
angle, the speed of going up and down the stairs will be
automatically reduced to ensure safety. When the automatic
balance adjustment is completed, the original speed will be
restored. And under the automatic adjustment mode of the
loading board, in the initial position of going upstairs, only the
point switch needs to be controlled, and no other operation is
needed.
