Xray XT8 Скачать руководство пользователя страница 43

Страница: 43 / 44

DIFF OIL

Part

Viscosity

359301

1000 cSt

359302

2000 cSt

359303

3000 cSt

359305

5000 cSt

359307

7000 cSt

359310

10 000 cSt

359320

20 000 cSt

359330

30 000 cSt

359340

40 000 cSt

359350

50 000 cSt

359360

60 000 cSt

359380

80 000 cSt

359392

100 000 cSt

DIFFERENTIALS

Adjust the characteristics of the differentials by using thinner or thicker silicone oil.

Differential Oil thickness Characteristics

Front

Thinner

· increases steering into corners (off-power)

· if oil is too thin the steering may become inconsistent, especially it can lose forward traction

(and steering) during acceleration out of corners

Thicker

· increases stability into corners during braking

· increases steering on-power at corner exit

Center

Thinner

· front wheels unload more during acceleration

· decreases on-power steering (reduces oversteer)

· easier to drive on rough tracks

· if a high-power engine is used you could waste too much power and sometime “cook” the oil in the

center differential because it “overloads”

Thicker

· more all-wheel drive effect

· better acceleration

· increases on-power steering (reduces understeer)

· better suited on high-bite, smooth tracks

· car can be more nervous to drive especially if a high power engine is used - you might need to be

smooth on the throttle

Rear

Thinner

· increases cornering traction

· increases steering into corner

Thicker

· decreases rear traction while cornering

· reduces wheelspin

Wing position/angle Characteristics

Higher

· increases stability at higher speeds

Lower

· increases stability at lower speeds

Forward

· decreases rear traction

Rearward

· increases rear traction

Flatter angle

· level jumping or nose-diving

Steeper angle

· increases traction at higher speeds

· less nose-diving

CLUTCH

You can adjust the engagement characteristics of the clutch by changing the clutch springs or changing the orientation of the clutch shoes.

Clutch springs

Characteristics

Thinner (0.9mm)

· clutch engages earlier at lower RPM

· more gradual acceleration

· easier to drive but not as aggressive

Thicker (1.0mm)

· clutch engages later at higher RPM

· more sudden acceleration

· car is more aggressive

CLUTCH SHOE ORIENTATION

Adjust the engagement characteristics of the clutch by changing the orientation of the clutch shoes.

Clutch shoe orientation

Characteristics

Trailing shoes

· clutch engages more smoothly

· more ideal for slick track conditions

Leading shoes

· clutch engages more aggressively

· more ideal on high-traction tracks

REAR WING

Adjust the position and angle of the rear wing using the different mounting

position of the wing supports.

Trailing shoes

Leading shoes

SILICONE DIFF OIL

XT8 SET-UP

IMPORTANT!

Make equal adjustments on both left and right sides of the rear wing.

Changing the oil in the front differential affects overall steering response.

Changing the oil in the center differential affects the front-to-rear drive.

Changing the oil in the rear differential affects cornering traction and overall steering.

Use only the genuine premium

quality XRAY silicone diff

oils. The differential oils are

availabe in 50ml size in these

viscosities:

CLUTCH SPRINGS

Adjust the engagement characteristics of the clutch by using different clutch springs.

Содержание XT8













































Результаты поиска

Содержание XT8

Отзывы:

Похожие инструкции для XT8

Бренды по названию

Популярные бренды

Xray XT8, Инструкция по эксплуатации

Результаты поиска

Содержание XT8

Отзывы:

Похожие инструкции для XT8

Бренды по названию

Популярные бренды