Xray X1 Скачать руководство пользователя страница 41

Страница: 41 / 44

902205

SH M2x5

Before cutting and making holes on the body, put the unpainted body on the chassis

to confirm the mounting position and location for holes and cutouts.

Before cutting and making holes on the front wing, put the unpainted wing on the

front bumper to confirm the mounting position and location for holes and cutouts.

Before painting, wash the inside of the body with mild detergent, and then rinse and

dry thoroughly.

Mask the helmet shield if you wish.

➋

➌

➎

➏

➐

➑

Apply paint masks as appropriate.

Paint the body using paints formulated for polycarbonate bodies.

When the paint is dry, remove the masking.

Carefully cut out the body using appropriate scissors or cutting tools.

When you have finished cutting, peel off the external protective films.

TRACK-WIDTH ADJUSTMENT SHIMS

#338584 5x7x0.2mm

OPTION

#338585 5x7x0.3mm

OPTION

#338586 5x7x0.5mm

INCLUDED

338586

SHIM 5x7x0.5

5x7x0.5mm

Make sure that the wheel moves freely

after nut tightening. If the wheel binds,

loosen the nut slightly.

This shim allows fine adjustment of the front

track-width. Use the same shims on both sides. Use

5x7x0.5mm shim for initial setting.

BEARING OIL

(HUDY #106230)

OIL

FRONT WING

960040

N M4

940510

BB 5x10x4

BODY REAMER (HUDY #107600)

HIGH DOWNFORCE:

More steering

LOW DOWNFORCE:

Less steering

➍

➊

5. FINAL ASSEMBLY

2x front wings

Body

#803070 HUDY 1/10 FORMULA RUBBER TIRE - FRONT (2)

#803080 HUDY 1/10 FORMULA RUBBER TIRE - REAR (2)

BODY

#379701 XRAY

INCLUDED

#379702 WORLD CHAMPION EDITION OPTION

ALU NUTS M4

#296540-B ALU BLUE

OPTION

#296540-0 ALU ORANGE OPTION
#296540-K ALU BLACK

OPTION

#296540

STEEL SILVER INCLUDED

Содержание X1













































Результаты поиска

Содержание X1

Отзывы:

Похожие инструкции для X1

Бренды по названию

Популярные бренды

Xray X1, Инструкция по эксплуатации

Результаты поиска

Содержание X1

Отзывы:

Похожие инструкции для X1

Бренды по названию

Популярные бренды