Xray T4'21, Инструкция по эксплуатации

Страница: 28 / 48

28
ANTI-ROLL BARS
VIDEO TECH TIP
▶
901304
SB M3x4
901302
SB M3x2.5
REAR ANTI-ROLL BAR
REAR ANTI-ROLL BAR
ANTI-ROLL BAR POSITION
5. FRONT & REAR TRANSMISSION
If both sides still do not
move at the same time,
adjust the length of the
bar holders.
When the bars are set, verify that both
sides move at the same time. If they
do, the bars are set up correctly. If not,
make sure that both downstops are the
same and that the bar wire is flat.
L=R
INITIAL SETTING = OUTER BALL
Use the OUTER ball on medium-high
traction tracks. The car will roll less which
will make it easier to drive with more
cornering speed.
Use the
INNER
ball on low-traction
tracks (mainly low-traction carpet
tracks). The car will have more traction &
more steering, but will be more difficult
to drive because the car will roll more.
OUTER INNER
INITIAL POSITION
2x
3x4mm
3x4mm
3x2.5mm
3x2.5mm
Set the bar into the center, remove the play in the bushings, and
tighten the set-screws fully.
CENTER
DETAIL