Rev.: 20120210
Platform: XK09
Firmware: CHRYSLER Remote Start Ready Installation
The Mobile Integration Systems
© 2012 Directed. All rights reserved.
Installation Type 1a (with T-Harness)
Page 3
Programming Button
4
4
4
2
0
2
X
K
0
9
Facing view
Behind Ignition Switch
Ignition
Barrel
LED
Programming
Button
4
4
XL202
Antenna
XOVER
2: Green: RAP OFF
3: -
4: -
CHTHX1
(optional)
(+)12v
TX
(-) Ground
RX
(+) 12v
RX
(-) Ground
TX
The
optional
XL202 and
antenna are not included and
MUST be purchased separately.
Hood Pin
Neutral Safety Switch
13: Violet/Brown: Parking Light MUX*
5: Blue: (-) Hood
See page 5 for
wiring information
1: -
Wires are listed by pin numbers. This display is not representative of connector pin layouts, which are often stacked.
*See Parking Lights wiring reference chart for the appropriate Parking Lights configuration.
OR*
(-) Driver door pin
Purple wire in
driver kick panel
Important!
The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the XK09.
11: Black/White: (-) Parking Lights via Relay*
