Rev.: 20120210
Platform: XK09
Firmware: CHRYSLER Remote Start Ready Installation
The Mobile Integration Systems
© 2012 Directed. All rights reserved.
Using your XK09-CHRYSLER RSR
Takeover with Smart Key
Takeover with Key
4
3
3
1
1
Press the button to remote start the vehicle.*
Press the button to remote start the vehicle.*
Enter vehicle
with the Smart
Key in hand
Ready to
drive off
Ready to
drive off
2
2
Press the Push-to-Start (PTS) button twice to turn
the ignition ON.
Important:
Do NOT press the brake pedal.
Enter the vehicle and turn the key to ignition.
2X
ENGINE
START
STOP
PUSH
Do NOT
press the
brake pedal
You can now put the vehicle in gear and drive off.
You can now put the vehicle in gear and drive off.
Enter the vehicle, while making sure the key is inside with you.
Press button to
remote start*
Press button to
remote start*
PA
NI
C
Page 19
KEY
Key at ON
START
O
F
F
O
N
* Your aftermarket remote starter model may differ from the one shown in the illustrations.
* Your aftermarket remote starter model may differ from the one shown in the illustrations.
