XPower XD-165L, Руководство пользователя

Страница: 14 / 56

English - 14
Troubleshooting Guide
PROBLEM POSSIBLE CAUSE SOLUTION
Dehumidifier
does not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
Dehumidifier
runs but humidity
level does not
decrease
The dehumidification system is
within startup process.
Wait for 3 minutes
(180 seconds) until the
dehumidification light stops
blinking.
The humidity level setting is
too high.
Decrease the humidity level
setting.
The working area is not
enclosed.
Make sure the area is tightly
sealed.
There are other sources of
humidity in the room.
Remove these sources or wait
until they completely volatilize.
The humidity level has reached
the setting level.
Decrease the humidity level
setting, set to constant
dehumidification mode, wait
until the humidity level rises up
again.
Dehumidifier runs
but humidity level
does not decrease
The machine was tilted and
wasn’t positioned upright for
enough time before use.
Position the machine upright on
a level surface and wait for at
least 4 hours before next use.
The air filter or air inlet/outlet is
blocked.
Remove blockage.
The environmental temperature
is too low/high or the humidity
level is too low.
The dehumidifier is designed to
work in an environment with a
temperature of 33.0 °F to 105.0
°F (0.6 °C to 40.6 °C) and
relative humidity level of 20%
and higher. Make sure the room
temperature/humidity does not
exceed this range.