https://www.XPOtool.com
Item 62820, 62821
Page 3
The Tool Experts
01 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Operation of the pump
•
Familiarise yourself with the use of the pump, its limitations, and possible dangers.
•
Make sure that the power source meets the requirements of your device.
•
Disconnect the pump from the mains before carrying out maintenance work.
•
Release the pressure in the system before performing maintenance on a component.
•
Drain the liquid from the system before carrying out maintenance on the pump.
•
Secure the discharge line before starting the pump. An unsecured discharge line may recoil and
cause injury and/or damage to property.
•
Before each use, check the hose for wear and damage. Make sure that all connections are
properly secured.
•
Occasionally check the pump and system components. Keep the pump and the system free of
residues and contaminants. Carry out maintenance when necessary.
•
Provide means to relieve pressure on pumps whose discharge line may be shut off or clogged.
Personal safety
•
Always wear safety goggles when working with or on a pump.
•
Keep your work area clean, tidy, and well lit. Stow away tools and accessories when no longer
using them.
•
Keep bystanders away from your work area.
•
Child-proof your workplace by using padlocks and master switches and removing ignition keys.
•
When connecting an electrically driven pump, all electrical and safety regulations must be fol-
lowed.
•
The pump motor is equipped with an automatic resetting thermal protection and can restart
unexpectedly.
•
This device is designed for 230
V operation only. To reduce the risk of electric shock, make sure
the device is connected to a properly installed safety plug.
Danger of electric shock!
•
All wiring should be done by a qualified electrician.
•
Keep the mains cable away from sharp objects, hot surfaces, oil, and chemicals. Avoid bending
the cable. Immediately replace or repair damaged or worn cables.
•
Use cables of sufficient size to minimise voltage drop on the motor.
•
Do not touch a running engine. Modern motors can develop high temperatures during operation.
Additional precautions
•
Have the following things checked by an expert before using the pump: earth connection, neutral
line.
•
Residual current circuit breakers must comply with the relevant safety regulations and work
without faults.
•
Electrical connections must be protected from humidity.
•
If there is a risk of flooding, the electrical connections must be directed to a higher spot.
•
The circulation of aggressive liquids and abrasives must be avoided absolutely.
•
The waste water pump must be protected from frost and from running dry.
•
The pump must be supplied via a residual current circuit breaker (RCD) with a rated fault oper-
ating current of no more than 30
mA.